MSDS - Guanyl Thiourea

SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
MSDS Name:	Amidinothiourea, 99+%
Catalog Numbers:	25919-0000, 25919-0100, 25919-1000
Synonyms:	Aminoiminoethyl thiourea; Guanylthiourea; Amidinothiourea; 2-imino-4-thiobiuret
Company Identification:	Ronak Chemicals4709/1,G.I.D.C., Estate Nr. Sun Pharmaceuticals Ind. Ltd., Ankleshwar, INDIA
For information, call:	91-2646-23517
Telefax:	91-2646-55655

SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS
+----------------+--------------------------------------+---+ | CAS#        | Chemical Name | %      | EINECS#   | |----------- |------------------------------------|-----------| | 2114-02-5 |Amidinothiourea | 99+% | 218-308-0 | +----------------+--------------------------------------+----+ Hazard Symbols: XN Risk Phrases: 20/21/22

SECTION 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW Harmful by inhalation, in contact with skin and if swallowed.
Potential Health Effects Eye: May cause eye irritation. Skin: Harmful if absorbed through the skin. Ingestion: Harmful if swallowed. Inhalation: Harmful if inhaled. Chronic: Not available.

SECTION 4 - FIRST AID MEASURES
Eyes:	Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower lids. Get medical aid immediately.
Skin:	Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:	If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid immediately.
Inhalation:	Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:	Treat symptomatically.

SECTION 5 - FIRE FIGHTING MEASURES
General Information:	As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:	Use agent most appropriate to extinguish fire. Auto ignition Temperature: Not available.
Flash Point:	Not available.
NFPA Rating:	Not published.
Explosion Limits, Lower:	Not available.
Upper:	Not available.

SECTION 6 - ACCIDENTAL RELEASE MEASURES
General Information:	Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:	Clean up spills immediately, observing precautions in the Protective Equipment section.

SECTION 7 - HANDLING and STORAGE
Handling:	Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.
Storage:	Store in a cool, dry place. Keep container closed when not in use.

SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:	Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels. Personal Protective Equipment
Eyes:	Wear chemical goggles.
Skin:	Wear appropriate protective gloves to prevent skin exposure.
Clothing:	Wear appropriate protective clothing to minimize contact with skin.
Respirators:	A respiratory protection program that meets OSHA's 29 CFR ß1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State:	Crystals
Appearance:	white - off-white
Odor:	Not available.
pH:	Not available.
Vapor Pressure:	Not available.
Viscosity	Not available.
Boiling Point:	Not available.
Freezing/Melting Point:	160 - 164 deg C
Decomposition Temperature:	Not available.
Solubility	7 W/W % IN WATER (20ƒC)
Specific Gravity/Density:	Not available.
Molecular Formula:	NH2C(=NH)NH2CSNH2
Molecular Weight:	118.16

SECTION 10 - STABILITY AND REACTIVITY
Chemical Stability:	Stable under normal temperatures and pressures.
Conditions to Avoid:	Incompatible materials.
Incompatibilities with Other Materials:	Strong oxidizing agents.
Hazardous Decomposition Products:	Irritating and toxic fumes and gases.
Hazardous Polymerization:	Has not been reported

SECTION 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS#:	2114-02-5: YR8250000
LD50/LC50:	Not available.
Hazardous Decomposition Products:	Irritating and toxic fumes and gases.
Carcinogenicity:	Amidinothiourea - Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA. See actual entry in RTECS for complete information.

SECTION 12 - ECOLOGICAL INFORMATION
For further information, contact Ronak Chemicals

SECTION 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

SECTION 15 - REGULATORY INFORMATION
European/International Regulations European Labeling in Accordance with EC Directives
Hazard Symbols:	XN
Risk Phrases:	R 20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
Safety Phrases:	S 23 Do not inhale gas/fumes/vapour/spray. S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS#	2114-02-5: No information available.
Canada
CAS#	2114-02-5 is listed on Canada's DSL/NDSL List.
CAS#	2114-02-5 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits	US FEDERAL
TSCA
CAS#	2114-02-5 is not listed on the TSCA inventory. It is for research and development use only.

SECTION 16 - ADDITIONAL INFORMATION

MSDS Creation Date: 7/16/1996 Revision #0 Date: Original. The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no way shall the company be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if the company has been advised of the possibility of such damages.